Reasons Your fiat ducato remote key replacement 500 Key Fob Won't Work
A key fob for the Fiat 500 is a handy way to unlock the doors and start the car. There are a myriad of reasons why the fob won't be functioning. These include a dead battery or damage to the receiver module, issues, and interfering.
This listing is for an NEW replacement key for fiat ducato van fiat panda remote key replacement Flip Key Remote - look-alike Ilco brand that needs to be programmed professionally by a local automotive locksmith (click here to search for a Locksmith Search). This remote includes lock, unlock and trunk buttons.
Dead Coin Battery
The most common reason your 500 key fob will not work is the battery is dead. Modern key fobs only have only a limited range of operation and must be within just a few inches of the vehicle in order to work. If you are far from your vehicle and press the key fob button the car won't respond and will display an “Key Fob Not Detected” message in the instrument cluster.
If this happens, simply replace the battery on your coin cell (Part number CR2032) with a new one from a reliable brand like Panasonic, Duracell, or Energizer. They are typically available at your local hardware store, or online.
After you've replaced the battery in the coin cell You can test it by standing close to your fiat key fob Not working 500 and pressing the buttons. The parking lights should light up and the key fob will operate the lock and unlock switch.
If your key fob isn't working after replacing the battery, it might be water damage that hinders it from connecting to the module inside your vehicle. Water damage can happen in many ways, such as a simple splash or submerging the key fob into saltwater at the beach. If you suspect that your fob has been exposed to water, put it in a rice bag to draw out the moisture. If this does not work, you'll need to have your fob reprogrammed either by an auto locksmith or a dealer.
Water Damage
Damage to the water supply can occur if you submerge the fob in the ocean, or wash it in a washer. Saltwater can be particularly harmful to the fob's circuit board that can cause it to short out and eventually end up dying. If you get the fob wet, it's not a good idea but if you drop it in a glass of water or don't remember to remove it from your pants pocket before running the washer Don't give up hope.
Remove the battery first. Before replacing the battery, clean the electronic chip with isopropyl or similar products. Next check the fob to check if it functions. If the key does not function, it may need to be changed. This is usually done by an auto locksmith or dealer.
If the key is newer and has never been programmed to your vehicle It will most likely need to be replaced completely. A professional locksmith in the automotive industry can do this job. The locksmith will have to cut the key to match the ignition of your vehicle. The locksmith will also have to reprogram your fob into the car's system. This is a fast and inexpensive process which can be completed on the next day.
Receiver Module Issues
One of the simplest reasons your 500 key fiat 500 fob may stop functioning is that it's out of range. The remote typically has an operating range of 30 feet or less and if it's far from your car, it will not respond to your commands. It's easy to solve this problem by moving the remote closer to your vehicle until it responds.
If you've replaced the battery in your coin (commonly called a “button” or “watch”) and the fob won't work it could be due to an internal circuit board problem. Reprogramming the fob is usually the solution to this problem. You can find directions on how to do this for all vehicles by searching YouTube or consulting the owner's manual.
It is sometimes necessary to replace the metal clips that hold the coin batteries in place. If they loose tension, it can stop your coin battery from sitting properly and cause your remote to malfunction.
In rare cases the fob might be out of the vehicle's sync because of software or hardware problems. You can fix this issue by visiting your local auto-locksmith or dealer to reprogram your key fob. In some instances, they may need to reinstall the software in your body control module, too.
Interference
Interference can also cause the key fob to not receive or transmit the signal. This may happen if the keyfob is in close proximity to a radio transmitter, like a cellphone or radar detector. The key fob could not work due to a bad connection with the buttons water damage or damage to the internal chips.
If the key fob has suddenly stopped working, without notice and you've tried everything you can at home to fix it e.g. You might have a damaged 500 receiver module in the event that you've tried replacing the battery, reprogramming or using a spare key fob. The receiver module is situated under the dash, and it picks up the radio frequency signals from the key fob. It transforms the signals into electronic commands that are then read by the vehicle.
(Image: https://g28carkeys.co.uk/wp-content/uploads/2023/10/Audi.jpg)Luckily, there is an easy method of resetting all on-board systems in your 500 and include the key fob. Disconnect the battery for 15 minutes by removing first the negative cable and then the positive cable. Then, reconnect the battery. This will eliminate any remaining electricity and restart the car's computers. This can help get your key fob working again. If the problem persists you should seek out an expert certified technician. They will be able to identify the root of any issues.(Image: https://g28carkeys.co.uk/wp-content/uploads/2023/10/renault-logo-evolution.jpg)
