Replacement UPVC Door Handles

If you're replacing your handles or adding a little more security, you can find the right handle for your door. These handles made of upvc are easy to install and will meet the 92mm minimum centre distance of multipoint locks.

(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/12/Replacement-Doors-300x200.jpg)The backplate fixing center and the keyhole/lever dimensions are the most important measurements. Make sure you compare these to your existing measurements prior to placing an order.

Lever/Pad

Lever pad door handles are made up of a lever handle on one side and a paddle-shaped handle on the other. These are designed for use with key wind locks. However they can also be attached to multipoint split spindle door locks.

Our range of upvc handle lever pads are available in a range of finishes. These will be displayed in the drop down list after you have identified the correct handle for your doors. Not all styles of handles are available in every finish and you should always check the sizes and technical drawings for the specific product that you are looking to ensure that you can get the correct size and fit.

When selecting the new set of lever pad door handles made of upvc, it is important to ensure that they correspond to the PZ (distance between the handle spindle and the center of the hole in the cylinder) of your existing multipoint locks, as these need to be in the same line to allow doors to remain locked, whether from the inside or the outside. Our handles are designed to fit the majority of standard cylinders, but it is a good idea to double-check prior to purchasing.

If you want to upgrade to dual spindle levers, you will need to remove the handles you have already installed and disassemble the lock case. This will require an extra split inline cylinder. You can purchase these separately. We have included a diagram of the technical aspects in the images of each product.

Once you have removed the screws holding the door handle you have, it is an ideal idea to loosen them and examine the mechanism to determine how it's performing. If the screws aren't tight enough, you may need to loosen them further. Then, you can remove the spindle from the door handle and replace it with a new Upvc handle. It is important to ensure that the handle is in the right position prior to installing it. You can do this by placing your finger between the door frame, and the handle to ensure that it's level.

Lever/Lever

The lever door handles are used to operate a multi-point sash lock door handles that uses the Euro cylinder. They are found on a variety of double upvc doors as well as wooden and aluminum doors. They come in two forms, having an interior lever and a paddle on the outside. Sprung - These have an internal spring cassette within the backplate, which helps bring the handle lever into an upright position. Non-sprung: These do NOT include a mechanism that can spring the handle lever to a horizontal angle.

To fix a door handle lever that is sagging, you'll need to find the hole or detent access pin. This is usually small, protruding ring or rectangular that is located on the base of the handle plate. Once you have located it, loosen the set screw using a screwdriver and remove it to allow the lever to return to the horizontal position.

Once the handle is in a horizontal orientation, you can put the screws back in place and tighten them to make sure the handle is secure on the base plate. Consider applying a threadlocking solution to the screw threads in order to improve grip and prevent them from loosing over time.

Lever door handles that droop can be caused by a number of factors. The most frequent cause is that the fixings aren't tight and the lever bearing to bind up against the door. It could also be due to the fact that the levers are not being operated in a straight line and this is causing the latch mechanism, preventing it from fully springing back into action.

A common cause of a sprung lever not working correctly is the spring not being in the proper position on the backplate. To determine if the handle returns to its horizontal position, simply turn it.

It is crucial to fix any door handles that are loose immediately. This could lead to excessive wear on the screws and the handle may even be able to fall off the base plate. You should also tighten any loose screws on a regular basis to prevent them from becoming looser.

Lever/Snib

The handles for doors made of upvc are also referred to as handle sets with a 'Snib' and have a snib button towards the top of the lever that you can press down to lock your patio door handle replacement if you don't have the Dummy lock. They are usually fitted with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or the lock centre) door lock. We also carry a selection of other 68PZ door handles from various manufacturers, including Ferco and Fab & Fix.

You can update your home by changing your door handles whether you are replacing existing handles or installing new ones on doors that you've constructed. There are a variety of styles available for door handles made of upvc including the classic lever on the backplate. Other options include straight or curly short latches as well as knobs that resemble dummy knobs to lock multi-points. These are great for French doors.

Lever on backplate handles are usually rectangular in shape, however you can also find oval or circular-shaped versions that are referred to as rose door handles. These kinds of door handles have a lever or knob on a backplate, which sits behind the lever or knob and is sometimes called a rosette. However, some back plates can be detached to allow for concealed fixing.

The handles are available in a variety of finishes, including coloured and chrome finishes to match your door and other hardware such as knobs, bolts and hinges. Some handles are equipped with a grub screw to attach the lever or knob firmly to the spindle. Other handles are supplied with bathroom spindles that can be used to operate bathroom locks. They feature a thumbturn turn as well as a release mechanism, which is ideal to use on doors for bathrooms.

Mortise

The tubular latch is the most likely to be the culprit when your door handle made of upvc door handles replacement is slammed shut. It could be due to various reasons but the most prevalent is a lack of lubrication in the latch plate. It is possible to solve this issue by opening the door and spraying lubricant onto the handle and window locking handles. Or, it could be that the latch plate is separated from the backplate. This can be a bit more problematic and requires a professional to fix.

A multipoint handle system is the ideal solution to a stuck door handle. These handles are mounted through the faceplate and are operated with a key or thumb turn knob that activates the cam that locks the deadbolt. The handles are available in a number of different sizes to fit different types of uPVC doors. They are also available in a variety of attractive finishes to complement the existing hardware. The handles can be bought on the internet or through the local locksmith and can be installed with clear instructions.

If you want to replace the handle set, you'll be required to be aware of the PZ size of the cylinder. This is the distance from the edge of the frame of the door to the center point of the hole for the handle in millimetres. You should also know if your door has hook locks or a mortise lock. Once you have these measurements, the most efficient method to determine the right handles is to search by brand option on the website. This will narrow down the options, and you will then choose the appropriate size from the list.

A typical handle set includes an arm with two screws of various lengths, drill guides, and instructions for installation. Smart versions, like the Igloohome Smart Mortise 2+ include a mortice lock with keypad. These are more complicated devices and are best suited for professional installers or very skilled DIYers. Certain handle sets come with a range of other accessories, like weather strips, that can be used to enhance the look of the door.