How to Replace a UPVC Window Handle

If your upvc window handle is damaged, don't panic. Replacing a window handle made of upvc is an easy task and can be completed in a matter of a few steps.

It doesn't matter if you have an in-line or a crank espagnolette window handle they all have a square spindle that protrudes from the back plate. This spindle is then slotted into the locking device.

Find out the type and the size of the handle and lock.

Over time, window handles and locks could get damaged or lose functionality. The good thing is that this can often be fixed without having to replace the entire uPVC window unit. One of the first things to do is determine the type of lock and handle you have because this will help determine what replacement parts you'll need.

Identifying the kind of handle is done by looking at the base of the handle. There is the screw or pin that is holding the handle to its base. If the screw is not present it could be an indication that the handle has split off from its base section. If the handle has split internally and no longer grips onto the spindle, this can be a sign that it is in need of replacement.

There are a variety of uPVC handles that are available, but the Espag handle is the most popular. They are usually secured using two bolts, and come with a spindle that engages the lock mechanism within the frame of the window. These handles are typically used on uPVC tilt and turn windows.

Another kind of uPVC window sash replacement handle is the Cockspur handle. They're similar to Espag handles, but have smaller projections from the frame. These handles are usually used on older uPVC window frames.

Venetian window handles are another option. They are similar to Espag handles but have a flat bottom which allows them be installed in a flush position with the frame. These are a great choice for homeowners who are looking for an elegant, stylish handle that blends with their uPVC window sash replacement frames. The handles are available in a variety of colours that can match any decor.

Measure the spindle

Before you purchase a new handle, it's crucial to know how the old one handle is attached. This will determine if it's too tight or loose, and if it's able to fit inside the window frame. This can be determined by identifying the handle type and measuring the spindle. The spindle is a metal shaft that connects the handle to the lock in the window frame. It's available in different sizes and the current industry standard being 8mm. Older handles may have 9mm of cross-section, so you'll have to measure your old handle to make sure you get the correct size replacement.

There are many kinds of window handles, however the most commonly used are inline Espagnolette and cockspur handles. These handles operate a locking mechanism in the window, using shootbolt rods which secure the window when it's closed. Depending on the type of handle, they are held in place using screws or pins.

You can buy Upvc handles that are replacement online or in most DIY stores. They are available in a variety of finishes, and can be used for new or replacement double glazed window windows replacement near me. For added security, they can be either key-locking or a non-locking fire escape.

To take off the handle just open the window to the door and remove all the screws holding it in place. Keep the screws in a container to protect them from damage. After the screws are removed, remove them carefully from the handle. Find the distance from the base of the spindle up to the end. This will provide you with the information you need to buy the right replacement. The spindle of the handle is the steel shaft connecting it to the gearbox for locking in the window frame.

Take off the handle from the old one.

Changing the handle of a uPVC handle is a straightforward task that takes just five minutes, if you have the right tools. The first thing to do is identify the size and type of the lock or handle. This will allow you to choose the right replacement. You can then measure the spindle to make sure that the handle will fit. Then, you'll have to take the handle off and replace it with the new one.

The majority of uPVC handles are inline Espagnolette handles, which are equipped with a central spindle that slots into the locking mechanism of the window. They are typically simple to remove, but they may require force if they get stuck. There are usually two screws that keep the handle in place which can be removed using either pliers or a screwdriver. There may be a need to remove pins, based on the kind of handle.

After you have removed the screws, you can then remove the handle you were using previously. The top of the base plate will be visible when the handle is in the open position, revealing two screws can be removed. There's also small silver or another colour sticker that needs to be removed if it's in place.

You can now put in the new handle using the screws from the previous handle. Make sure the handle is in an open or unlocked position, then align the screw holes to the holes on the window. After this is done then you can replace the screw caps and test the new handle to ensure that it works correctly. It's simple to replace the uPVC, however you have to do it correctly.

Install the new handle

It's time to put in your new handle if it has been successfully removed the old one from the frame. Start by locating and removing the screw covers using your screwdriver. Once removed, place them in a safe location and move on to the next step.

Then screw the spindle in by aligning it with the hole. Align the holes in the handle with the holes in the window frame. Make use of screws of the same size as the previous.

uPVC Espag handles are fitted with a square 7mm spindle that rotates the lock mechanism fitted to the window. This style of handle is found in most modern uPVC Windows. uPVC Cockspur (also called by the name Cotswold) handles have an extended, curved nose that locks onto the outer frame or cross member of the transom bar. They are usually found on older uPVC windows.

After the new handle is in place, it's important to verify that it functions properly by locking and unlocking the window a few times. If everything goes according to plan, the new uPVC handle should be securely fixed and operating smoothly. If you encounter any issues these steps will assist you identify the issue and resolve it quickly. Bridgewater Glass can help you when you're experiencing issues with your uPVC handles or any other glazed home improvements. Our glaziers are trained to repair or replace windows with a variety of handles and frames making us a good choice for your double glazed windows replacement-glazing requirements.

Test the new handle

Over time, uPVC handles get damaged and worn out. They can become less secure and effective and therefore it is essential to replace them immediately. It's also recommended to do this after you upgrade your windows, since changing your lock and handle will maintain the integrity of the windows you have just bought.

There are a variety of uPVC window handles. Some are secured to the frame with pins or screws, while others feature blades that fit into the lock mechanism. Each type has a different method of replacing it, and you'll need to know what type you own.

The most well-known kind of window handle is called the espag. They're typically found on newer uPVC Windows. The spindle extends from the handle into the lock gearbox, and it activates the locking mechanism when you open the window. They are also easy to take off, but you should take care not to damage the mechanism or the handle while doing so.

Cockspur handles are another alternative to uPVC window handles. They're held with a spur that hooks onto the striker plate in the shape of a wedge on the frame, and when you shut or tilt the window, it activates the locking mechanism. This kind of handle may be more difficult to repair than other handles, but it's an excellent choice for homes with a lot of windows.

Venetian window handles are fixed by two bolts and feature an elongated projection from the frame, which is not the case with the Espag handle. They're great if you want a flush handle that blends in with your uPVC windows replacement glass. These are great for both commercial and residential properties.(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/12/Replacement-Doors-300x200.jpg)