How to Programming a Subaru Key Fob at Home

(Image: https://g28carkeys.co.uk/wp-content/uploads/2023/11/key-from-new-car-2021-08-29-05-15-15-utc-min-scaled.jpg)Depending on how old your Subaru is, you may require having the key fob programmed by a dealer or an automotive locksmith. This is usually done by connecting a machine for programming to the computer in the car.

To program your subaru keys lost begin by unlocking the driver's doors using the door button control, then close it. You will hear the chime and see the dome lights flashing in the instrument panel.

Step 1: Locate the Transmitter Circuit Board

There are many ways to program your key fob. First, you must be aware of what kind of key fob you have. You can determine this by studying the shape of the key fob or by listening to your car for a chime.

Once you have the information you require, you can begin the process of programming your key fob from home. To accomplish this, you'll require a metal key and a flathead screwdriver. You can open the key fob by twisting. The key is inserted into the case and then release the battery by pushing the tabs that hold it in place. Replace the battery with a fresh one and then put the key fob case back together.

Step 2: Remove the key fob case

It is recommended to replace the battery of key fobs if they're not working. However, there are situations where the buttons on the key fob might be damaged. If you are able to see that the button's metal contacts have been damaged Try reconnecting them to make them work again.

Before you start the process, ensure the doors of your car are shut and the ignition is turned off. You can accomplish this by closing the driver's door, and then pressing the door button ten times in quick sequence. Then you'll hear the instrument panel chime, and your dome light should flash. This means that you are ready to move on.

Step 3: Insert the Key Fob in the ignition

Many websites will tell you how to program your brand new or replacement Subaru keyfob at home. But, the majority of them don't offer precise instructions. Reprogramming an electronic lock is best handled by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat, with all doors closed and the engine off. Open the door button control and use it to unlock all doors. Open and close the driver's door two times more. Remove and insert the ignition key (don't turn it) 10 times over 40 seconds. The system should sound chirps to confirm that the settings have been changed.

Step 4 Step 4: Turn on the ignition

Before proceeding with this method of key fob programming, it is important to note that this method works only with a functioning key already. If not, a dealership or auto-locksmith will need to program a key for your Subaru Fort Bliss.

Once the key is programmed, it will be capable of starting your vehicle within five seconds. Start by closing all doors and turning off the engine. Then, sit in the driver's seat and open all doors using the door button control. Insert the key into the ignition and then turn it to the first position. The electrical systems will be activated, however, the engine will remain in neutral. Repeat this process 10 times.

Step 5: Unlock Driver's Door

Subaru provides a variety of premium automobiles equipped with key fobs that lock and unlock doors, turn on the engine, and defrost windows. However, sometimes, these devices do not function properly.

Find a locksmith or dealer to fix the issue. This will solve the issue and ensure your vehicle is safe.

First, you must open and close the door to the driver's side. Then, you need to place the ignition key and move it to the first position. Then, turn it back to the off position. Do this ten times in the row as fast as you can. After the tenth time, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock key on the driver's Door

If you need to replace the battery inside the Subaru key fob, the procedure is straightforward. Open the exterior fob case. Utilize a flathead tool to pry the inside of the case and take out the batteries that were in there.

After removing the old battery, replace it with a new one and close the case. Then, get in the driver's chair and unlock all doors using the door button control. After that, put the ignition key and turn it so that the electrical systems are on, but the engine is off. Repeat this 10 times in a line until you hear a chime on the instrument panel. This puts the system in programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

For certain owners, the irritating noise that occurs when locking and unlocking a lost subaru keys key fob from outside can become distracting. In some instances, you can disable the sound by shutting and opening all doors by double-clicking the lock button on your key fob.

Switch the ignition off and shut all the doors as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime when this is accomplished. The chirp indicates that the fuel-filler lid and door lid are locked keys in subaru forester. The setting can also be altered to ensure that the doors and fuel-filler lid lock automatically without having to press a request switch.

Step 8 Step 8: Enter the 8-digit Transmitter Number

Keep the first 8-digits in your mind. Then, sit in the driver's seat, close the doors and turn the key to the first position. After 10 turns, your instrument panel should begin to sound at least once.

Next, open the case for the key fob and look for the circuit board that controls the transmitter. The circuit board should have one or two 8-digit numbers. Note the first number sequence and follow the instructions in this guide to register the code on the system of your vehicle. This procedure may require a visit to the dealer for older models.